Advance Technologies
Palam Vihar, New Delhi, Delhi
SEND SMS
SEND EMAIL

New Items

Sub-Duct Anchor

Sub-Duct Anchor
  • Sub-Duct Anchor
Get Best Quote
Approx. Price: Rs 220 / PieceGet Latest Price

Product Details:

Minimum Order Quantity1000 Piece
MaterialStainless Steel
SizeAll
GradeA+
Usage/ApplicationConstruction
StandardISO, JIS, GB
Fire ResistanceYes

The telephone network from telephone exchange Up to the customer’s premises need to be protected against water /sediments/unwanted objects etc. Our Sub-Ducts Anchor/Plugs are used for sealing cables and inner ducts in the telephones networks. These Sub-Duct Anchor/Plugs are made of suitability compounded rubber. Expansion of the Anchor/Plug is achieved by pressing the rubber between metallic washer. All metallic parts are manufactured from Galvanised steel. Stainless steel parts can be supplied on request. Following are the features of these Sub -Duct Anchor:
• Water Tight
• Simple to install
• Removable and reusable
• No special tools required for installation
• Protect cable from sharp corners at duct entry
• Can be installed in any type of duct
Request
Callback
Yes! I am Interested

Aluminium Duct Spacer for Micro Ducts

Aluminium Duct Spacer for Micro Ducts
  • Aluminium Duct Spacer for Micro Ducts
Get Best Quote
Approx. Price: Rs 70 / PieceGet Latest Price

Product Details:

Power SourceElectric
Usage/ApplicationIndustrial
ShapeRectangular
ColorMulti

 

ALUMINIUM DUCT SPACER FOR MICRO DUCTS

These duct spacers for micro ducts are made of Aluminum die casting &

supported by fully threaded steel rods & steel nuts. After

aluminum die casting the separators are machined to remove all

sharp edges & extra aluminum deposited during casting.

The construction of these spacers is such that there is a base

aluminum horizontal bar which is fixed with the threaded rod

with help of nuts. There are number of horizontal aluminum

separators which can be added depending on the requirements.

After installing the bundles of 12/8 mm & 25/20 mm micro ducts

between the horizontal separators the top separators is fixed

firmly with the help of nuts.

These aluminum duct spacer for micro duct are used for installing

bundles of plastic micro ducts of 12/8 mm & 25/20 mm dia in a

trench as mentioned in the table below.

 

Cat No

Inside Width

Height

Micro Duct Type

ALMD-Type -1

80 mm

140 mm

Bundles of 12/8 mm

ALMD-Type-2

80 mm

340 mm

Bundles of 25/20 mm+12/8 mm

 

Features:-

  • Manufactured from Aluminum die casting.

  • Easy to accommodate large number of micro ducts bundles as per the requirements.

  • Easy to install

  • Used to uniformly separate micro duct bundles of different sizes in the trench.

  • These duct spacers for micro ducts are made of Aluminum die casting &
  • supported by fully threaded steel rods & steel nuts. After
  • aluminum die casting the separators are machined to remove all
  • sharp edges & extra aluminum deposited during casting.
  • The construction of these spacers is such that there is a base
  • aluminum horizontal bar which is fixed with the threaded rod
  • with help of nuts. There are number of horizontal aluminum
  • separators which can be added depending on the requirements.
  • After installing the bundles of 12/8 mm & 25/20 mm micro ducts
  • between the horizontal separators the top separators is fixed
  • firmly with the help of nuts.
  • These aluminum duct spacer for micro duct are used for installing
  • bundles of plastic micro ducts of 12/8 mm & 25/20 mm dia in 
  • Cat No

    Inside Width

    Height

    Micro Duct Type

    ALMD-Type -1

    80 mm

    140 mm

    Bundles of 12/8 mm

    ALMD-Type-2

    80 mm

    340 mm

    Bundles of 25/20 mm+12/8 mm

 

 

Features:-

  • Manufactured from Aluminum die casting.

  • Easy to accommodate large number of micro ducts bundles as per the requirements.

Request
Callback
Yes! I am Interested

Male Hook

Male Hook
  • Male Hook
Get Best Quote
Approx. Price: Rs 20 / PieceGet Latest Price

Material:-Malleable iron, zinc

Finish:-Galvanized, black enamel self (zinc)

 

Cat No

Size(mm)

PEPL820-20

20mm

PEPL820-25

25mm

Request
Callback
Yes! I am Interested

C Crimp Connector

C Crimp Connector
  • C Crimp Connector
Get Best Quote
Approx. Price: Rs 50 / UnitGet Latest Price

C’ Crimp Connectors are made from Electrolytic Copper and are


used in overhead line tapping, dead ending and earthing

applications.

Cat No


Conductor Section

Main (mm2)           Tape (mm2)

Dimension

B                 L

CCC-25

25                                    16-25

20                          16

CCC-35

35                                    25-35

26                          22

CCC-50/35

50                                    35

28                          23

CCC-50/50

50                                    50

28                          23


Request
Callback
Yes! I am Interested

Aluminium Duct Spacer

Aluminium Duct Spacer
  • Aluminium Duct Spacer
Get Best Quote
Approx. Price: Rs 70 / PieceGet Latest Price

Product Details:

MaterialPVC
ColorMulti

ALUMINIUM DUCT SPACER

These duct spacers are made of Aluminum die casting &

supported by fully threaded steel rods & steel nuts. After

aluminum die casting the separators are machined to remove all

sharp edges & extra aluminum deposited during casting.

The construction of these spacers is such that there is a base

aluminum horizontal bar which is fixed with the threaded rod

with help of nuts. There are number of horizontal aluminum
separators which can be added depending on the requirements.

After installing the pipes between the horizontal separatorsthe top separators is fixed firmly with the help of nuts.

These aluminum duct spacer are used for installing

plastic ducts of 20 mm & 32 mm dia in a trench asmentioned in the table below.

Cat No

Size

Number of ducts per row

AL-20 -1

Width 151 mm x Height 240 mm

5

AL-20 -2

Width 138 mm x Height 240 mm

5

AL-32

Width 184 mm x Height 300 mm

4

Features:-

  • Manufactured from Aluminum die casting.

  • Easy to accommodate large number of ducts as per the requirements.

  • Easy to install

  • Used to uniformly separate the 20 mm & 32 mm ducts in the Trench

Request
Callback
Yes! I am Interested

Fiber Glasss Marker Post

Fiber Glasss Marker Post
  • Fiber Glasss Marker Post
Get Best Quote
Approx. Price: Rs 2,500 / PieceGet Latest Price

Product Details:

ColorMulti

Description:- Fiber Glass marker post manufactured by Advance Technologies is an above ground utility marker used for identifying and avoiding major costly repairs, interruption of utility services and/or injury to those around. These Fiber Glass marker post also be used as a Highway Delineators Boundary marker or Trail Markers. Salient Feature:- • Light Weight • High Visibility at night • Whether resistance • U.V.Resistence • Maintenance Free • Easy to install Construction:- The Fiberglass Marker Post are made from light weight, high Impact Fiberglass reinforced resins. This will provide maximum whether resistance against rot and rust from hot/cold or UV exposure. The fiber will also not cause irritation to eye and/ or skin. The unique design and material can take repeated flexing and abuse. The decals are manufactured from quality steel sheets with black lettering on yellow back ground and are fixed to the Fiber Glass marker post with blind revit.The marker post can be supplied with standard or custom decals, color & design. The Marker post & decals are designed & manufactured in accordance to figure 1. Reflective self adhesive tape bands are provided and wrapped around the post at suitable places for visibility at night. Figure 1 2 Installation:- Installation of Fiber Glass Marker post is very easy on most of the soil conditions & does not require special installation tools. The installation of these marker posts is fast & is inexpensive way to mark & protect the OSP network. The Fiber Glass Marker Post is generally placed in accordance with figure 2
Request
Callback
Yes! I am Interested
Product Price :Get Latest Price
We are dealing in a wide and best range of Neutral Links.


These are made of high conductivity Brass and available in Brass colour,

Tin plated and Nickel plated.

Cat No

LN-01


Request
Callback
Yes! I am Interested

Terminal Blocks

Terminal Blocks
  • Terminal Blocks
Ask For Price
Product Price :Get Latest Price

Terminal Blocks

These are made of high conductivity Brass and available in Brass/Tin

plated color.


Request
Callback
Yes! I am Interested

Earthing Blocks

Earthing Blocks
  • Earthing Blocks
Ask For Price
Product Price :Get Latest Price

Earthing Blocks

These are made of Brass and are tin plated. These are available in sizes of 4 ways and 8 ways.

Cat No

Size

EBL-04

4 Ways

EBL-08

8 Ways


Request
Callback
Yes! I am Interested
X

Explore more products

Triplex Duct Plug
Triplex Duct Plug
Get Best Quote
Inspection Tee
Inspection Tee
Get Best Quote
Earth Rod
Earth Rod
Get Best Quote
Sub-Duct Anchor
Sub-Duct Anchor
Get Best Quote


Reach Us
V. P. Mishra (Partner)
Flat No. 227, DDA, MIG Flat, Sector 19 Pocket 1, Dwarka
Palam Vihar, New Delhi- 110075, Delhi, India



Call Us


Send E-mailSend SMS